EFA multi connector for exhibition stand and shop fitting (PU 10)

Corner connector set for precise butt joints in furniture making This complete corner connector set from the VC connection system is designed for butt joints in traditional cabinetry. If you wish to join sides, bases or tops at right angles, you need a solution that aligns precisely and holds securely. This is exactly where this set comes in. It combines a steel dowel, threaded pin and housing into a technically precise unit. The connection is purely mechanical, without glue, and can be undone at any time. This makes the set suitable for both high-quality bespoke pieces and mass production. Features : Complete set comprising steel dowel, threaded pin and housing For butt 90-degreejoints in the cabinet body Glue-free and reversible assembly High friction fit without lateral displacement Compensation for drilling tolerances possible Galvanised steel components for a long service life Cabinet connectors for stable and dimensionally accurate furniture constructions As a cabinet connector, this set serves to join two components precisely at a right angle and fix them permanently. The steel dowel is inserted into the prepared drill holes and guided through the housing. The threaded pin centres the connection and applies controlled tension. This creates an even force-fit that pulls the components securely together without shifting them sideways. This is particularly crucial for coated panels or visible edges. You achieve clean joint finishes and avoid stress in the material. The galvanised steel components ensure high load-bearing capacity and resistance to mechanical stress. Even with frequently assembled furniture, the connection remains dimensionally stable and reliable. The connection system with a clear division of functions between the components The VC connection system is based on the precise coordination of its individual parts. The steel dowel provides guidance and stability within the workpiece. The housing absorbs the forces and ensures a clean embedding in the board. The threaded pin with an M5 thread generates the necessary clamping force and pulls the components together precisely. A technical advantage lies in the ability to compensate for minor drilling tolerances. Minor manufacturing deviations can be compensated for without the connection losing any stability. This increases reliability during everyday workshop use and reduces the need for rework. As no adhesive bonding is required, the furniture remains demountable and flexibly adaptable. Practical questions regarding corner connectors in daily use People often ask whether a mechanical connection can match the stability of a glued solution. The high frictional force of this connection system creates a structure capable of withstanding long-term loads, yet one that remains detachable. This is particularly advantageous during transport, repairs or subsequent modifications. Another aspect is the appearance. Only a small grub screw remains visible in the area of the housing. External surfaces remain free of additional brackets or fittings. Assembly is quick once the drill holes have been correctly positioned. Tension builds up immediately upon tightening, centring the components in their position. This complete corner connector set thus offers a technically sophisticated solution for butt joints in furniture and interior fittings, where dimensional accuracy, stability and reusability are equally important.

Sturdy and releasable connections for centre panels in furniture construction This set is specifically designed for connections in centre panels where two components need to be precisely positioned and permanently joined together. It utilises a coordinated system comprising double dowels, connecting pins, threaded pins and housings. All components are designed to interlock and create controlled tension. This results in a precise, load-bearing connection that can also be released if necessary. This system offers a reliable and clean solution, particularly in cabinet construction where components must be precisely aligned. Summary : Set comprising : 2x steel double dowels 1x connecting pin 2x threaded pins (ISK M5) 2x housings For connecting centre panels and cabinet components Mechanically clamped connection Dismantlable and reusable Suitable for precise and repeatable assembly Centre panel connectors for precise alignment in cabinet construction A centre panel connector must ensure that components are precisely aligned with one another and do not shift when tightened. This is precisely what is achieved by the combination of double dowels and a connecting pin. The double dowels guide the components precisely, whilst the connecting pin, in conjunction with the threaded pins and housings, generates the necessary clamping force. You insert the double dowels into the prepared drill holes and connect both sides via the connecting pin. When the threaded pins are tightened, the components are pulled together evenly. This creates a form- and force-fit connection that maintains its position even under load. Typical applications include centre panels in cabinets, shelving systems or complex cabinet structures. Particularly with larger components, the system ensures that alignment is maintained and nothing warps. Connection system for controlled clamping and high stability As a connection system, this set impresses with its clear technical function. Unlike simple plug-in connections, it actively works by clamping the components together. The threaded pins engage with the housings and pull the connection together in a controlled manner. The connecting pin ensures the transfer of forces between the components. For you, this means high repeatability during assembly. Even after repeated disassembly, the function remains intact, as no components are damaged or worn out. This is particularly important when furniture is to be transported or adjusted at a later date.

Precise joints in furniture making with a well-designed system This set is designed for applications where mitre joints need to be clean, stable and detachable. You are not working with individual components here, but with a coordinated system comprising hinge dowels, threaded pins and housings. All parts interlock technically and allow for controlled clamping of the components. This system really comes into its own with mitre joints, where there is little material available and high precision is required. You can use it to create perfectly fitting joints without having to rely on traditional solutions such as glue or complex milling. Summary : Set comprising: 1x hinge dowel, 2x threaded pins, 2x housings For mitre joints in furniture and interior fittings Mechanically clamped joint Removable and reusable Suitable for precise cabinet and corner joints Mitre connector for clean and stable corner joints A mitre connector must achieve two things: precise alignment and reliable force transmission. This is exactly where this system comes in. The joint dowel is designed to function cleanly even with slight deviations in the drill hole and to pull the two components into exact position when tightened. You insert the dowel into the prepared drill holes; the threaded pins engage with the housing and generate the necessary tension when tightened. This creates a form- and force-fit connection that remains stable even under load. Typical applications include mitre joints in cabinet bodies, frames or high-quality furniture components where visible joints are to be avoided. The internal mechanism keeps the surface clean. Corner connectors for precise 45° joints in furniture construction As a corner connector, this set really comes into its own with 45° joints. Unlike simple connectors that merely hold the parts in place, this system actively ensures that the two components are clamped together. This is particularly advantageous for long mitre joints or coated panels, as you can close the joint in a controlled manner without damaging the surface. A common question in practice is whether the joint holds without glue. The answer: For many applications, yes. The mechanical interlocking already provides a high degree of stability. If you apply glue as well, you increase the fatigue strength, but it is not necessary in every case. Cabinet connectors for detachable and repeatable assembly This set is particularly suitable as a cabinet connector when furniture is to be transported or assembled multiple times. The connection can be released at any time without damaging the components. This is a clear advantage over traditional connections such as Lamello or dowels + glue. You remain flexible and can readjust or replace components. Technically speaking, the housings accommodate the threaded pins, whilst the hinge dowels create the connection across the mitre joint. This interaction ensures that forces are distributed evenly and that no localised overload occurs. Typical applications: Cabinet construction in furniture making Dismantlable furniture High-quality interior fittings Constructions with mitred corners

Drilling jig: The basis for precise connections in the PV system With the basic drilling jig from Scheulenburg, you can rely on precise technology for processing PV connectors in furniture construction. This drilling template has been specially developed to efficiently realise the manual drilling of holes on the face and the exact marking of aligned surface holes. All the necessary drilling distances - 20, 30 and 33 mm - are already integrated, resulting in significant time savings and maximum repeat accuracy. Made from high-quality aluminium, the drilling jig is stable, lightweight and particularly precise thanks to standardised drill bushes. Ideal for carpenters, furniture makers and interior fitters who value accuracy and durability.Summary: Made from high-quality aluminium Integrated drilling distances: 20 mm, 30 mm, 33 mm For processing PV and FF connectors Suitable for surface and face drilling Standardised drill bushes for precise guidance Very light and robust Can be dismantled and combined with additional modules Tool-free handling possible Not suitable for mitre joints Made in Germany Drilling template: Easy handling with maximum precision The drilling template impresses with its practical design. Thanks to the structured grid and the fixed mounting of the drill bushes, consistent quality is achieved with every work step. The basic drilling jig really comes into its own when it comes to small batch production or demanding furniture construction. The lightweight construction reduces the weight during work, while the robust design ensures a long service life even with intensive use. Connection system: Perfect workmanship for furniture with a system The basic drilling jig plays a decisive role in the connection system around the Scheulenburg PV and FF connectors. The outstanding properties of the system - such as high strength, vibration resistance and visual restraint - can only be fully utilised with precisely positioned drill holes. The basic jig enables you to prepare furniture parts quickly, cleanly and efficiently to meet the high demands of modern constructions and designs. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all important information as well as the required components for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Drilling jig: The precise solution for XS furniture joints The basic drilling jig for the XS system from Scheulenburg was developed to drill holes for furniture joints quickly, precisely and efficiently. It is suitable for all joints with the XS connector - with the exception of mitre joints. The drilling template helps you to precisely position end drill holes and aligned surface drill holes. The integrated standard drilling distances of the XS system (20, 30 and 33 mm) are already taken into account, which allows for particularly time-saving processing.Summary: System: Scheulenburg XS furniture connector system Function: Drilling aid for frontal and aligned drill holes Drill hole spacing: 20 mm, 30 mm, 33 mm (integrated) Material: Aluminium - light, stable and durable Drill bushes: Standardised for precise guidance Not suitable for mitre joints Can be dismantled and combined for flexible applications Easy to install and handy to use Drilling template XS: Fast, precise and user-friendly This drilling template makes it much easier to work with the XS connection system. It is consistently designed for practical use - whether in the workshop, during assembly on site or for customised products. Thanks to the clear grid and robust aluminium construction, handling remains comfortable and precise - even with repeated use. The option of dismantling the gauge or combining it with other components ensures maximum flexibility in daily use. XS connection system: Consistent precision right from the start The XS drilling jig is part of the comprehensive Scheulenburg fastening system and is optimally matched to other components such as housings, dowels and threaded pins. It ensures that the positioning and fitting accuracy of the connection is right from the start - and thus supports professional implementation in series production and individual projects. The basic drilling jig is a valuable tool in furniture construction for all those who prioritise precision. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all important information as well as the required components for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Metal carcase connectors: The XS grub screw ensures a reliable connectionThe XS grub screw is specially designed for the XS furniture connector system and enables powerful, secure connections in furniture construction. As a metal body connector, it plays a central role in the interaction between the dowel and housing. Thanks to its precise shape and hexagon socket, the grub screw is easy to install and fixes the dowel reliably - vibration-resistant and form-fit. This small component is particularly indispensable for high-quality cabinet furniture.Summary: Type: Type: Grub screw with hexagon socket Material: Steel, galvanised Thread: M10Various lengths to choose from Suitable for XS furniture connector system Ensures secure tightening of the dowel in the housing Vibration-resistant even under permanent load Easy to install thanks to hexagon socket drive Suitable for cabinet and furniture joints Corner panel connector: compact, efficient and securely connectedThe XS grub screw fulfils a crucial function as a panel connector for corners. In combination with the matching housing and dowel, it creates an invisible, stable corner connection - ideal for the construction of intricate furniture carcasses. The dowel is securely fixed via an inclined tightening plane and reliably pulled to the edge of the panel. The result: a permanent, unobtrusive connection that can be released again if required. XS connection system: Sophisticated concept for furniture constructionIn the XS connection system, the grub screw becomes the load-bearing component between the housing and the dowel. The combination ensures a high-strength, precise connection without glue or additional fasteners. Thanks to standardised dimensions and high-quality materials, the result is a reliable system that is easy to work with and delivers long-lasting results - ideal for joinery, interior design and the furniture industry. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Furniture carcase connector: The PV housing ensures force-fit connections in furniture construction The furniture carcase connector in the form of the PV housing is a central component of the modular connection system from Scheulenburg. With an outer diameter of 10 or 12 mm and customised drilling dimensions, it provides a precise, vibration-resistant mount for the matching PV grub screw. The housing fixes the steel dowel centred in the furniture body and thus ensures a secure force fit - without any glue or wooden dowels. The compact design with a small visible surface makes the connector ideal for high-quality, dismountable furniture constructions with aesthetic requirements. System: PV furniture connector system from Scheulenburg Drilling dimension to match the eccentric system Outer diameter: 10 or 12 mm Can be used from 16 mm panel thickness Material: galvanised or nickel-plated steel High tightening force with approx. 3.5 mm tightening travel No lateral movement due to positive centring Easy installation - without glue, without wooden dowels Visually discreet connection thanks to small visible surface (ø10 mm) Vibration-resistant - for lasting stability Made in Germany - tested quality for long-lasting applications Scheulenburg PV System: A sophisticated connection concept for modern furniture The Scheulenburg PV system is designed for applications in furniture construction where both technical resilience and visual restraint are required. The connection is invisible and without adhesive joints - a clear advantage for furniture that is regularly dismantled and transported. The precise matching of the housing, dowel and grub screw creates a secure connection with high strength and minimal assembly effort. Corner panel connectors: Clean connections in the smallest of spaces As a panel connector for corners, the PV housing is particularly suitable for obtuse corner connections or constructions with limited space. It reliably prevents the panels from moving sideways and still allows furniture to be dismantled at any time. This makes the connector the ideal solution for system furniture, series production or customised joinery work with high quality standards. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Furniture carcase connector: The steel dowel for butt joints ensures a reliable holdThe furniture steel dowel carcase connector from Scheulenburg is part of the sophisticated FF connection system and was designed for force-fit, butt joints in furniture construction. Thanks to its sophisticated geometry and galvanised steel finish, it ensures high stability and ease of installation at the same time. The precise thread guide enables secure insertion into the housing and exact alignment of the furniture parts - without any glue or wooden pins. The dowel is particularly impressive for cabinet furniture, shelving and structural components thanks to its permanent connection without visible fittings. Summary: Material: galvanised steel Drilling dimensions: 24 mm and 34 mm Thread variants: M6 or EURO thread Tightening distance: approx. 3 mm Vibration-resistant - for a permanent connection Suitable for butt joints in carcass construction No lateral panel displacement High processing reliability Compatible with the FF connection system Installation possible without glue or dowels Made in Germany Invisible wooden connectors in furniture construction - for a clean, concealed connection solutionInvisible wooden connectors such as this FF steel dowel enable aesthetic solutions for butt joints. The dowels are screwed into the counter plates and guided to the housing via precise drill holes, where they are tightened and fixed in place using the matching grub screw. This creates a permanent connection with high contact pressure without any visible external connecting elements. The result: clear lines, smooth surfaces and a modern look - perfect for sophisticated furniture construction. Wooden panel connectors in the FF system - quick to install, permanently resilientThe FF system is a well thought-out solution for anyone who favours simple assembly and robust functionality. The wooden panel connector is a central component of this. With its galvanised surface, the FF dowel not only offers corrosion protection, but also mechanical strength - even with repeated installation. The simple screw connection makes the steel dowel ideal for both series production and customised production. Note: The illustration may differ slightly from the original. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all important information as well as the required components for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Centre wall dowels for precise furniture joints - PV dowels In modern furniture construction, precision is just as important as stability. The PV centre wall plug has been specially developed for centre-side connections and impresses with its simple installation, high load-bearing capacity and permanently reliable results. Advantages of the PV centre wall plugCan be screwed in directly - the centre wall plug is screwed into the wood (short thread). High-quality galvanised steel - resistant to loads and corrosion. Precise tightening path (approx. 3.5 mm) - ensures consistent connection force. No lateral plate displacement - the components remain exactly in place. Vibration-resistant - the connection remains stable even when the furniture is subjected to heavy loads. Detachable - furniture can be assembled and disassembled several times without compromising stability. Technical details at a glance Diameter: ø 7 mm Thread: EURO 6×7.5 mm Drilling dimension: 24 mm Length: 28.5 mm (alternatively also available in 38.5 mm) Suitable from panel thickness: 16 mm or 20 mm Thanks to these dimensions, the centre wall plug is ideally suited for use in workshops as well as in series production. The direct screw-in technology saves time, reduces work steps and eliminates the need for additional components such as sockets. Part of the Scheulenburg PV system The PV centre wall plug is part of the modular Scheulenburg PV connection system, which stands for maximum precision and flexibility in furniture construction. In combination with matching housings and threaded pins, a force-fit connection is created that requires no glue at all. A particularly practical feature is that assembly is possible without any offset or lateral movement. This makes the centre wall plug ideal for furniture constructions where visual cleanliness and technical precision are crucial. Advantages in furniture construction Quick installation thanks to direct screwing into the wood No socket required - fewer parts, less effort High accuracy of fit for blunt corner joints Durable stability thanks to galvanised steel Efficient for series and customised production Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Door levelling - simple solution for precisely fitting furniture doors If furniture doors jam, drag or no longer close correctly, this can have several causes - crooked floors, uneven weight distribution or minimal construction inaccuracies. The complete door levelling set offers a precise way to compensate for these differences in no time at all. Developed for professional furniture construction and interior design, it is a flexible retrofit solution that can be used to readjust and permanently stabilise furniture doors. Whether for new installations or as a corrective measure - the door leveller reliably brings your furniture doors into the correct position. The complete set consists of precisely matched components that enable tool-free or easy-to-fit retrofitting. The robust plastic design with integrated steel parts ensures durability and a secure connection. Thanks to the well thought-out design, the door leveller is suitable for a wide variety of carcase and door solutions - such as kitchen cabinets, wardrobes or wall units.Summary of components: Set components: 1x eccentric knob, steel sleeve, M4x30mm screw, plastic installation roller, M6x20mm screw, steel sleeve Material: Plastic (black), galvanised metal parts Application: Compensation of furniture door offset, height and depth adjustment Installation: easy to retrofit, also for existing furniture Special features: invisible installation, durable design, suitable for various door sizes Professional adjustment of furniture doors - with the right system In professional furniture construction, it's not just the look that counts - functionality and ease of use must also be right. A correctly adjusted furniture door prevents tension in the material, reduces noise when opening and closing and extends the service life of the entire piece of furniture. The complete door levelling set ensures noticeable improvements here. The precise adjustability of the components enables exact door guidance without the need for time-consuming reworking. Especially in kitchen construction, where every millimetre counts, or with high doors that can sag slightly due to their own weight, the door leveller is a useful addition to the standard fitting. The complete set can be integrated into the existing construction and does not detract from the design or function. It is quick and easy to install and can be dismantled - a clear advantage for planners and fitters. Complete door levelling set - small measure, big effect during installation and use The complete door levelling set ensures that furniture doors close where they should - precisely and reliably. It equalises tolerances, corrects crooked installation situations and brings mobility back into your design. With high-quality furniture in particular, it is crucial that the door alignments are exactly right - and this is precisely where this set comes in. Thanks to its modular design, it is suitable for a wide range of application scenarios, from private interior fittings to series production. The low assembly effort in combination with the high effect makes the door leveller an indispensable detail for all those who work with precision and quality. A practical aid that makes all the difference in everyday life. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

M4 × 10 mm connecting screw - reliable connecting screw for furniture joints The M4 × 10 mm connecting screw with slotted drive is an elementary component in the furniture connector sector. It connects components non-positively when it is screwed into a suitable connecting sleeve. Thanks to its precise dimensions (M4 × 10 mm) and the galvanised surface, it can be used safely and permanently. Thread: M4 Length: 10 mm Drive: Slot (combination slot possible) Material: Galvanised steel Packaging unit: 200 pieces Function in the connection system In combination with a connecting sleeve (Ø 5 mm / M4), a force-fit connection is created between furniture components. The screw is guided through the sleeve and thus firmly clamps the components together. This type of connection allows precise alignment and at the same time provides a detachable connection if adjustments are required at a later date. Application and advantages The M4 × 10 mm connecting screw is ideal where space-saving and unobtrusive connections are required in furniture construction. The galvanised surface protects against corrosion and the screw can be installed using standard tools (e.g. slotted or Phillips screwdriver). As it is detachable, it is particularly practical for modular furniture or constructions that could be changed at a later date. With this connecting screw, you get a tried-and-tested fastener for precise furniture connections - robust, reliable and versatile. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Connecting sleeve Ø 5 mm M4 - precise wooden connector for stable constructions The Ø 5 mm connecting sleeve with M4 internal thread is a tried-and-tested element for precise and resilient furniture connections. It is inserted into a Ø 5 mm hole and used in combination with a suitable connecting screw. The internal thread allows the screw to be securely tightened, ensuring precise alignment and lasting stability. Internal thread: M4 Drill diameter: Ø 5 mm Material: galvanised steel Available in various lengths Packaging unit: 200 pieces Function and area of application The connecting sleeve ensures that screw forces are absorbed evenly and that the components remain permanently connected. It is primarily used where precise alignment is crucial - for example, for connections between side and rear panels, carcass furniture or frame constructions. The combination of a precise hole and secure thread ensures a clean work result. Advantages in furniture construction Made of galvanised steel, the connecting sleeve is resistant and protected against corrosion. It enables a detachable connection without the wood wearing out due to frequent screwing. This makes the sleeve suitable for both industrial production and craft projects where precise and stable furniture joints are required. The Ø 5 mm M4 connecting sleeve provides you with a robust connecting element, which supports precise alignment and ensures long-lasting results in furniture construction. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Corner connectors for wood: The XS housing for stable furniture jointsThe XS housing is a central component of the XS connection system from Scheulenburg. Made of galvanised steel with a diameter of 15 mm, it offers a reliable solution for force-fit connections in furniture construction. Thanks to its compact design and precise manufacturing, it is particularly suitable for applications where stability and aesthetics are equally important.Summary: Diameter: 15 mm Lengths: 17 mm, 19 mm, 21 mm, 28 mm Suitable for panel thicknesses from 20 mm Material: galvanised steel Vibration-resistant No lateral panel displacement High frictional connection Made in Germany Metal corner connectors: precision and durability in furniture constructionAs a metal corner connector, the XS housing offers an excellent solution for stable and precise connections. Its design enables a high level of frictional connection without lateral panel displacement, which is particularly advantageous for demanding furniture constructions. The vibration-resistant connection ensures long-term stability, even under high loads. XS connection system: Efficient assembly for professional resultsThe XS connection system from Scheulenburg is designed to enable simple and efficient assembly. The combination of housing, steel dowel and grub screw allows furniture components to be connected quickly and precisely. The high-quality workmanship and well thought-out design of the system help to achieve professional results with minimum effort. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Wooden panel corner connectors: work precisely and stably with the right housing The housing for corner connectors for wooden panels from Scheulenburg in the FF system is an impressive central component for concealed, force-fit corner joints Corner joints in furniture construction. The galvanised steel housing is precision-manufactured and, in combination with the matching grub screw, provides a secure connection - vibration-resistant, precise and durable. Developed for panel thicknesses of 15-29 mm, it enables concealed installation, which ensures a high-quality appearance and high load-bearing capacity. The FF housing shows its strengths particularly in the case of delicate cabinet furniture or frame constructions: compact in design, yet strong in frictional connection.Summary: Material: galvanised steel Plate thickness: 15-29 mm Drilling depth: Depending on the selected housing Drilling diameter (D): 15.0 mm Vibration-resistant and resilient Concealed installation for a clean look Compatible with FF system plugs Easy installation without special tools Made in Germany Connection system with sophisticated technology for corner applications The Connection system of the FF series is known for its clever and practical solution for modern furniture Furniture joints. The housing is the centrepiece: this is where the grub screw is inserted, which tightens the dowel and thus creates a force-fit connection. Compared to classic eccentric connectors in particular, the FF system offers greater strength, safer processing and higher repeat accuracy. This creates corners that remain permanently stable even with frequent assembly and disassembly - and without visible connecting elements. Furniture connectors for sophisticated designs - unobtrusive and powerful A high-quality furniture connector must do more than just connect parts: It must also match the design. The FF housing fulfils this requirement with its compact design and the ability to be fully recessed into the material. The galvanised surface protects against corrosion and the precise drilling dimensions guarantee exact results. In combination with other components from the FF series - such as Dowels or cover caps - the system can be flexibly applied to almost any situation.Note: The illustration may differ slightly from the original. Here you can find the current Scheulenburg catalogue. This catalogue contains all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Cover cap: For concealed screw covers with a perfect fit The ø18 mm cover cap is the clean solution for visually covering screw heads and drives - suitable for the housings of various connection systems. The precisely fitting cap can be fitted without tools and not only protects the screw head, but also ensures a uniform, tidy appearance in the furniture interior. It is ideal for shelving systems, cabinet furniture and concealed constructions where a visible screw connection is to be avoided. The cover cap is available in white or black as required and therefore blends discreetly into both light and dark furniture surfaces.Summary: Material: Plastic Diameter: ø18 mm Colour variants: White or black Suitable for screw head or thread drive Compatible with standard furniture connectors Tool-free installation by simply pressing on Concealed appearance with exposed screw connections Ideal for cabinet furniture, shelving systems and fronts Stable hold thanks to precise form fit Available as a packaging unit with 100 pieces Screw cover: Easy to fit, permanently clean A screw cover such as this cover cap fulfils several requirements at the same time: it protects the connection against dirt and damage, prevents the ingress of moisture and, last but not least, ensures a clean finish. Whether in the body area or for visible internal connections - you can reliably and permanently seal open screw connections with just one movement. The system has proven itself particularly in series production and commercial construction thanks to its ease of use and reliable fit. Connector cover: aesthetics meets function The ø18 mm connector cover is more than just a visual detail - it makes a decisive contribution to the value of a piece of furniture. When used correctly, it ensures a uniform appearance, reduces visible drill holes and effectively conceals screw connections. In combination with modern connection systems, such as those used by form32, highly functional yet aesthetically pleasing furniture constructions can be realised. The choice between white or black offers additional design freedom - with technical precision and professional standards. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Cross nut bolt ensures versatile applications in furniture construction The ø10 mm cross nut bolt with M6 thread is a real all-rounder when it comes to securely connecting wooden elements Connection of wooden elements in furniture or interior design. As the central connecting element, the clamp is inserted at right angles to the screw-in direction of the screw and provides a positive and non-positive connection positive and non-positive connection with high retention. It is typically used in combination with threaded screws and is used for cross and end connections as well as for frame or rack constructions. Thanks to its low installation depth and high load-bearing capacity, this cross nut bolt is particularly suitable for tight installation situations or furniture constructions that can be detached again. The galvanised surface provides lasting protection against corrosion and ensures a long service life - even with frequent disassembly.Product summary: Product type: Cross nut bolt / clamp Diameter: ø10 mm Thread: M6 internal thread Material: Steel, galvanised Suitable for: Cross and end connections Ideal for furniture construction, racks, carcasses and frames High frictional connection with minimum installation depth Concealed installation possible Removable application Corrosion-protected thanks to galvanisation Packaging unit: 100 pieces Multi-purpose connector with robust steel quality for precise fits A Multi-purpose connector such as this clamp offers maximum flexibility in use. In combination with metric screws, stable transverse and longitudinal connections can be realised even under high loads. The bolt is inserted at right angles to the connection plane and locks the screw securely in place thanks to its centred thread. Thanks to its small design, the connection remains almost invisible - a clear advantage for high-quality furniture and interior design solutions where design and technology have to work together. Clamp connector with system: easy to install, permanently resilient The ø10 mm clamp connector with M6 is not only mechanically resilient, but also easy to work with. Once inserted into the workpiece, the clamp provides a secure mount for the screw connection. The precisely manufactured threaded hole ensures exact screw guidance - ideal for series assembly or modular designs. Whether as a spare part or as part of a new system: this cross nut bolt is a reliable component in modern furniture construction. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information as well as the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Furniture connection cross nut bolt: ø12 mm bolt for strong clamp connections with M8 thread The cross nut bolt Furniture connection in the ø12 mm version with M8 thread is specially designed for larger and more load-bearing structures in furniture construction. As a component of the PV-FF clamp connector system, this bolt plays a supporting role in the production of friction-locked 90° connections. It is inserted transversely into the workpiece and serves as a receptacle for the conical dowel, which is tightened via a grub screw and centred in the bolt. The precise manufacturing ensures an exact fit and a backlash-free result - ideal for sophisticated carcase and frame elements.Summary: Material: galvanised steel Diameter: ø12 mm Thread: M8, suitable for larger dowels Compatible with PV-FF clamp housings ø15 mm Can be used for panel thicknesses from approx. 19 mm Transverse mounting for holding the clamp High tightening force and permanently form-fit Vibration-resistant connection, can be released several times Concealed installation without visible elements Made in Germany Use large-dimensioned clamp connector - with ø12 mm cross nut bolt The clamp connector unfolds its full potential with the ø12 mm cross nut bolt for resilient corner connections Corner joints. This variant is particularly suitable for larger pieces of furniture with a higher weight or stability requirements. The dowel is guided precisely via the housing bore and pulls itself centred into the bolt - the result is a tight fit without readjustment. This connection is not only mechanically resilient, but its concealed position also makes it visually unobtrusive and suitable for design-orientated constructions. Furniture connector with thread: ø12 mm M8 for maximum connection security A furniture connector with a thread in this dimension offers clear advantages for stable, detachable corner connections. The M8 threaded insert ensures high contact pressure and enables the use of dowels with a larger diameter or higher shear strength. The combination with the PV-FF clamp system results in a high-performance connection concept that impresses with its simple handling, reusability and strength. Whether in high-end interior fittings, shop fitting or modular furniture - this cross nut bolt makes the connection permanently reliable and efficient. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Double dowel furniture connector: The perfect solution for centre walls The double dowel Furniture connector from the XS series from Scheulenburg is specially designed for connecting components across a partition wall. It is ideal for fixing shelves to both sides of a centre partition, for example - with almost no visible screws. Thanks to its solid construction made of galvanised steel, the double dowel ensures high stability, an exact force fit and reliable alignment. The high tightening travel guarantees a secure connection without tension.Summary: Diameter: 10 mmVarious lengths to choose from Material: Galvanised steel Application: Connection of panels on both sides via a centre panel System: Part of the XS furniture connector system High tightening travel for precise alignment Vibration-resistant and permanently resilient No lateral panel displacement Disassembly possible without tools Particularly easy to assemble Scheulenburg connectors offer sophisticated technology for furniture construction The Scheulenburg connectors stand for quality, durability and maximum practicality. The double dowel is a good example of how clever technology can be used to realise functional and visually appealing furniture connections. Particularly in shelving, cabinets or partition wall systems, the double dowel offers a clean, powerful solution - without any visible fasteners on the surface. XS System: Precise furniture joints with a system As part of the XS System the double dowel can be optimally combined with other components such as the XS housing or matching Grub screws can be combined. The system is designed for maximum fitting accuracy and simple installation. The high-quality workmanship of all components ensures reliable results in furniture construction - whether in series production or in customised interior fittings customised interior fittings. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all important information as well as the required components for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Hole size: ø5.0 mm, spacing: 32.0 mm.The cabinet tube supports made of die-cast zinc with a nickel-plated finish are used to conveniently accommodate standard cabinet tubes made of rolled steel tube (not included in the product range). Depending on the version, the cabinet tube supports are either inserted into ø5.0 mm holes or screwed to the cabinet sides with corresponding countersunk screws. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Hole size: ø4 mm, hole spacing: 32.0 mm.The cabinet tube supports made of die-cast zinc with a nickel-plated finish are used to conveniently accommodate standard cabinet tubes made of rolled steel tube (not included in the product range). Depending on the version, the cabinet tube supports are either inserted into ø5.0 mm holes or screwed to the cabinet sides with corresponding countersunk screws. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Flat-head screw - functional screw connection for concealed applications The black flat-head screw with hexagon socket is an elegant yet robust fastening solution for furniture and interior fittings. It combines a discreet appearance with high functionality and is therefore ideal for both visible and concealed screw connections. Thanks to its flat screw head, it sits flush on the surface and enables clean, professional processing - especially with dark materials or coated surfaces, the black colour ensures discreet, unobtrusive integration into the overall appearance of the furniture. The screw is made of galvanised steel and impresses with its high tensile and compressive strength. It is driven by a sturdy hexagon socket, which enables controlled, powerful screwing in - even in tight spaces. The dimensions of the screw (ø15 mm head, M6 thread, 12 mm length) are perfectly matched to a variety of fasteners, including flat connectors, angle fittings or system connectors from our range. The black version also offers a certain amount of design freedom for customised furniture concepts.Summary: Material: Steel, galvanised or nickel-plated with a black coating Head diameter: ø15 mm Thread: M6 or M8 Various lengths to choose from Drive: Hexagon socket (SW4) Application: for black flat connectors, dark-coloured materials, concealed screw connection Properties: stable, visually discreet, high fitting accuracy Flat head screw M6 & M8 - customised for versatile connection systems Screws with M6 or M8 threads have long been standard in furniture construction - especially in conjunction with metal connectors or system fittings. The M6 flat-head screw in black offers a special option for demanding applications where both technical function and appearance play a role. Its wide contact surface ensures a good hold, even in soft materials or in applications without a lock nut. Thanks to its clear geometry, it can be positioned precisely and countersunk securely - ideal for consistent results in series or for one-off productions. The black coating makes it particularly suitable for fronts, side panels or interiors with a dark colour scheme. In combination with matching black fasteners, a harmonious overall look is created without visual disruption - a small screw with a big impact on the appearance. Hexagon socket flat head screw - safe handling and precise processing The hexagon socket drive has become indispensable in professional processing. It enables clean and controlled screwing in without slipping - even with higher tightening torques or hard-to-reach areas. The black flat-head screw with hexagon socket also offers a perfect balance between strength, flexibility and ease of assembly. This type of screw proves to be a reliable partner, especially in furniture construction, where a millimetre-precise fit is required. With this screw, you can join components permanently and positively - while remaining visually discreet. A proven solution for anyone who wants to harmonise function and design. Here you can find the current Scheulenburg catalogue. This catalogue contains all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Flat-head screw - precise fastening solution for stable constructions The flat-head screw is a tried and tested component in professional furniture and interior fittings. It is ideal for fixed connections in wooden materials and is used in particular where a secure hold and a clean surface are required. The combination of a flat head and metric thread makes it a versatile screw solution that is suitable for both visible and concealed connections. In terms of design, it impresses with its high load-bearing capacity and low risk of pulling through the material. Thanks to the hexagon socket, the flat-head screw can be screwed in securely and powerfully. It offers precise alignment and enables clean screwing in a wide variety of materials. The stable connection is particularly suitable for constructions with flat connectors or for screwing directly into pre-drilled elements. Processing is quick and precise - without any special tools.Summary: Material: nickel-plated steel Head diameter: ø15 mm Thread (d): M6 or M8 Length (l): various to choose from Drive: Hexagon socket (SW4) Application: for fastening flat connectors or for direct screw connections Properties: high strength, reliable hold, clean surface Flat-head screw M6 & M8 - for universal applications in furniture construction Flat-head screws in M6 and M8 are standard fasteners that are indispensable in modern furniture construction. They offer flexibility in the selection of materials and enable a stable connection, even with frequent disassembly. In combination with flat connectors, metal brackets or direct screw fittings, these screws realise their full potential. Their applications range from cabinet construction and shelving systems to customised furniture concepts. Thanks to the metric thread sizes M6 and M8, these screws can be perfectly combined with fasteners from the furniture industry. They guarantee a firm fixation with the possibility of repeated assembly, which also makes them ideal for modular systems. Hexagon socket flat head screw - secure drive for precise processing The hexagon socket drive of the flat-head screw ensures secure force transmission during processing. This drive offers clear advantages, especially in professional applications where quick and clean assembly is essential: No slipping, no tearing out - instead controlled screwing in with precise alignment. The flat head is also hardly noticeable and is ideal for flush integration into hardware systems or support elements. Used in conjunction with a suitable flat connector or directly in the wood, the flat-head screw ensures lasting stability. It is therefore an indispensable component in professional furniture assembly and fulfils the highest demands in terms of function and processing quality. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

The sturdy shelf supports from Scheulenburg-Direkt, made of high-quality die-cast zinc with a nickel-plated finish, are simply inserted into the furniture side panel (ø 5 mm hole) or, depending on the version, screwed into place using a countersunk screw. Ultimately, they are used to conveniently hold wooden shelves or glass shelves. The shelf supports are fully compatible with the furniture connectors from Scheulenburg-Direkt.The shelf supports are available in four different assembly variants: with or without pins, for screwing in or for screwing on. Fitting the shelf supports is child's play.Sold in packaging units of 200 pieces each, they offer optimum value for money.Ide shelf supports are also known by the following terms: Shelf support; Shelf support; Shelf fixation; Shelf holder. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all important information as well as the required components for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.

Wooden furniture connectors: The PV grub screw ensures strong and precise wooden joints The wooden furniture connector grub screw is a central element of the proven PV connection system from Scheulenburg. With its M6 × 8 mm thread size, hexagon socket and black ZNB surface, it is ideal for low-visibility, friction-locked timber joints in furniture construction. Whether for blunt corners, mitres or flat applications - the grub screw enables a permanent connection without glue or wooden dowels. At the same time, the piece of furniture can be dismantled and remains visually clean - even with dark surfaces.Summary: Dimension: to choose fromDrive: Hexagon socket or PZ Material: steel, galvanised or nickel-plated surface Suitable for PV housings: D01042, D01020, D01021, D01022, D01023 Vibration-resistant and form-fit High frictional connection with approx. 3.5 mm tightening travel No visible fasteners (ø10 mm visible surface) No lateral plate displacement Easy installation - ideal for professional applications Made entirely of steel - durable & robust Made in Germany - high processing reliability Scheulenburg PV system - compact, powerful and easy to install The Scheulenburg PV connection system is a well thought-out modular system for all common panel connections in furniture construction. It has been specially designed for panel thicknesses from 16 to 32 mm and combines high mechanical strength with maximum flexibility. The PV grub screw is the central connecting element which, in combination with the matching housings, enables a permanent, removable connection - without any visible screws or adhesives. Connection system with a concept - for corners, mitres and surfaces The PV connection system is particularly suitable for modern furniture designs with clear lines. Thanks to its small visible surface, the aesthetics are retained while the connection functions reliably on the inside. The precise drilling dimensions and the sturdy design made of galvanised or nickel-plated steel create a secure, permanently resilient connection system - efficient to work with and impressive to use. Here you can find the current Scheulenburg catalogue. In this catalogue you will find all the important information and the components required for each system. Alternatively, you can order a printed version of the catalogue free of charge: Scheulenburg catalogue.