Synchronised pull-out with table legs for indoors and outdoors

Innovative pull-out system for the tableInnovations do not stop in the furniture industry. The Steel Rotary Basic 37, for example, is a functional modular component with a support frame and pull-out system for the table Pull-out system for the table as such an innovation. This table base allows your end customers more freedom in the choice of table length thanks to the intelligent extension option.Length 700mm (extended 1146mm), width 716mm, height 67mmThe table frame is not included in the scope of deliveryKit for round tablesInexpensive, flat-packed frame for round tables with centre partitionwith 400 mm extensionFunction is realised with the Basic SystemFolding insert function integrated in the frameThe frame is assembled on the buyer's side and adjusted for the desired folding insert sizeSteel synchronised extension for a 40 cm extensionThe Steel Rotary Basic 37 is a tabletop frame made of high-quality steel. It is suitable as a support frame for round and oval table tops with a centre partition, which are easy to attach and convenient to pull apart.The special feature of the Steel Rotary Basic 37 is the integrated table extension option using a smooth-gliding synchronised extension. This means less effort is required to extend the table. Convenient handling is supported by the integrated folding insert. The table top to be divided in the middle extends simultaneously to both sides and the space in the centre of the table opens up to extend the table extension leaf. A separate tabletop extension can also be inserted manually at the customer's request. The system allows the table base to be extended by 40 cm.Easy to use - Basic 37 table extensionThe Steel Rotary Basic 37 table extension system is ideal for end customers with changing requirements for their table. It offers the optimum solution for different table types, providing your end customers with significant added value thanks to the 40 cm table extension. For example, the dining room table can easily be extended by two additional seats when the in-laws visit. Or is the living room table too small for a film night with friends? It only takes a few simple steps to extend the tabletop and offer guests greater comfort.The table extension kit is essential for you as a furniture maker in order to meet the wide-ranging demands of end customers. But you will also find buyers as a reseller because the table extension system can also be retrofitted to an existing table by the end customer.High-quality table runners from PöttkerThe Steel Rotary Basic 37 with extension and folding insert function comes from the company Pöttker GmbH. The manufacturer is internationally recognised by professional furniture makers for functional full-extension runners and functional fittings. As the world market leader for table extension systems, it is one of the most renowned suppliers in the industry. With the Steel Rotary Basic 37 as a kit for table extensions, the manufacturer once again demonstrates its high standards of quality and functionality.Delivery and assemblyDelivery takes place in flat packaging. The frame is assembled by the furniture maker. The same applies to setting the desired size of the folding inserts. If you are a reseller to private individuals, they can expect easy-to-understand assembly instructions as part of the delivery. Above-average technical expertise is therefore not required.You can find everything you need to know about pull-out fittings here: Table pull-outs info page.

Pull-out system table with soft-close functionFor interestingly designed furniture projects that include pull-out parts such as drawers or table tops, the aluminium Frontslide Lateral 55 pull-out system table is the ideal choice. Its special highlight is a built-in soft close function. These runners are available in either 830 or 930 mm lengths. Table extensions and similar components with loads of up to 90 kg can be moved over them. The runner bridges a distance of 653 mm to the stop. If you use a table extension like this at both ends of a table, you can add around 1.3 metres of extra space to a table. This means more seats at a table setting at an event, or more space for a hobby or for spreading out utensils at work, while less is needed in everyday life.Details:Available in different installation lengths: 830mm (650mm shelves) and 930mm (750mm shelves)Load capacity up to 90kgMaterial thickness 2mmMade from aluminiumWith soft close function Sliding runner with high load capacityThe pull-out has a width of approximately 653 mm, which brings the total span of an Alu Frontside Lateral 55 to 1483 mm when expanded. Provided that the load is distributed evenly and not at certain points, the construction is designed for a load of 90 kg. The steel outer rail, in which a sliding aluminium profile is embedded, plays a significant role in this. The enormous load-bearing capacity is the reason why steel was chosen for this and not aluminium. The resulting additional weight for the drawer runner is absolutely negligible, as the steel rail is firmly screwed to the furniture carcass and the dead weight only plays a role in the inner profile. Even with a high load, it must always be ensured that the profile continues to run in the channel of the comprehensive outer rail without tilting. This requirement is met by the design for long-term use. Low noise levels are part of the performance spectrum of the Alu Frontslide Lateral 55 during retraction and extension.Pull-out system table manufactured with high precisionThe designer of this pull-out system table has ensured that operational safety has been increased by rounding off the metallic edges that would otherwise remain sharp during production. You may be reminded of less sophisticated furniture runner systems of the past, where you could easily scrape yourself on the sharp edges. None of that is to be feared here. This also applies to objects that could come into contact with parts of the pull-out during handling. For creative freedom, it is also interesting to note that the table runner is available in various anodised colours and can therefore be adapted to different styles of furniture construction without the need for subsequent colour design. As with other rail systems from this manufacturer, a range of accessories is available for the Alu Frontside Lateral 55 drawer runner to complement its functions. These are attachments for a folding mechanism, whether FM/FM Stop or the flat design for wooden frames, with or without stop function. You can find everything you need to know about pull-out fittings here: Table runners info page. If you are looking for the right runner for your project, please use our table runner application search.