Wall unit pull-out system 60 mm fronts - Pull down system

Innovative kitchen corner unit solution from Vibo This kitchen corner unit solution is designed as a technically clean full-extension system for base units in corner areas. It is aimed at anyone who wants to make functional use of the hard-to-reach storage space in the corner unit without having to rely on complicated movement sequences or restricted access. The system consists of a fully customised mechanism and matching baskets and is designed for long-term use in the kitchen. The construction is clear, robust and designed for smooth movement, even with heavier loads.Details:Full-extension runner for corner base units with direct access Can be installed for 45 cm, 50 cm and 60 cm corner cabinet doors Reversible mechanism for left or right Two independently movable levels Pre-assembled soft-close system High load capacity up to 50 kg total load Galaxy and Urban basket versions with melamine base Kitchen corner unit solution for cabinet areas that are difficult to access A kitchen corner unit solution must do one thing above all: make the otherwise impractical corner space fully usable. This is exactly where this system comes in. The two baskets are guided out of the cupboard in a controlled manner when it is opened and bring the entire contents into the visible and accessible area. You don't have to reach deep into the cupboard, everything is right in front of you. The design works with two independent movement levels so that the baskets are guided neatly and do not jam against each other. The mechanism is designed for corner base units with door widths of 45, 50 or 60 cm. The reversible design means that it can be installed on the left or right. This is particularly relevant in kitchen planning, as the corner solution can be flexibly adapted to the respective room and furniture situation. Kitchen corner cupboard pull-out with full-extension runners and soft-close The kitchen corner cupboard pull-out works as a full-extension pull-out system. Both baskets extend completely out of the carcase and remain stably guided. The integrated soft-close system is already pre-assembled and ensures that the baskets are slowed down in a controlled manner when closing. This protects the mechanism and ensures smooth, even closing behaviour in everyday use. The load capacity is clearly defined. The mechanism is designed for a maximum total load of 50 kg. The front baskets can each carry up to 15 kg, the inner baskets up to 10 kg. These values are practical and take into account typical kitchen loads such as pots, pans or provisions. The design results in an increase in usable volume of up to 29 per cent compared to conventional corner solutions. Corner kitchen solution with sophisticated basket variants and materials There are two basket variants to choose from for this corner kitchen solution. The Galaxy model range consists of open baskets made of 10 x 4 mm wire rails with a melamine base. This design offers a good overview and is suitable for users who prefer an open structure. The Urban range uses closed aluminium baskets, also with a melamine base. This version has a calmer appearance and keeps the contents of the cupboard visually understated. Melamine plays a central role here. The shelves are resistant, insensitive to moisture and easy to clean. This is a decisive advantage, especially in everyday kitchen use. The combination of aluminium, metal and melamine ensures stable baskets that retain their shape even under heavy loads. The system is supplied as a complete unit, consisting of the mechanism and baskets. Assembly is clearly structured and can be carried out neatly, as all components are matched to each other. You get a technically sophisticated corner solution that utilises the available space consistently and functions reliably in everyday use. FAQ about the kitchen corner unit solution What cabinet sizes is the solution suitable for? The system is designed for corner base units with 45 cm, 50 cm or 60 cm wide doors. Can the kitchen corner unit pull-out be fitted on the left or right? Yes, the mechanism is reversible and can be installed on the left or right. What is the load capacity of the kitchen corner solution? The mechanism can bear a total load of up to 50 kg. The front baskets can each carry up to 15 kg, the inner baskets up to 10 kg. What are the advantages of melamine shelves? Melamine is easy to clean, moisture-resistant and resistant to everyday wear and tear in the kitchen. What is the difference between Galaxy and Urban? Galaxy has an open structure made of wire rails, Urban consists of closed aluminium baskets. Both versions have a melamine base. You can find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page

The practical larder pull-out is the perfect kitchen organiser This larder pull-out is designed as a technically sophisticated organiser system for tall kitchen cabinets. At its centre is a stable frame construction that neatly guides several baskets and provides controlled access to the entire cabinet contents. The system is designed for a front width of 60 cm and is aimed at kitchens where clarity, load capacity and a clear structure are required. Thanks to the swivelling pull-out, the baskets move outwards together with the door so that the entire contents are directly in front of you.Details: Tall unit pull-out for 60 cm front width Up to 12 drawers per side can be realised Self-supporting frame construction High-quality materials made of aluminium and melamine-coated shelves Reversible for left or right mounting Suitable for 120° door opening Removable baskets for easy cleaning Tall unit pull-out for structured storage and kitchen organisation The larder pull-out is designed for tall kitchen cabinets where the available storage space needs to be fully utilised. The combination of frame, door connection and several basket levels creates a system that swings out together when opened. You do not have to reach into the cupboard or move individual levels separately. All baskets can be accessed at the same time, which makes everyday life much easier, especially when storing provisions, jars or packaging. The construction is self-supporting and can be detached from the cabinet body. This makes both assembly and subsequent cleaning easier. Depending on the cabinet height, different numbers of baskets can be realised. Two sets of inner baskets and two sets of door baskets are recommended for a height of 1150 mm, and three sets for a height of 1675 mm. This allows the larder pull-out to be customised exactly to the existing height. Kitchen cabinet pull-out with sturdy frame construction and high load capacity As Kitchen cabinet pull-out the system is designed for heavy loads. The frame can support a total weight of up to 130 kg and remains dimensionally stable even when fully loaded. The inner baskets can each bear loads of up to 20 kg, the door baskets up to 5 kg per basket. This division is practical and takes into account the fact that heavy items tend to be stored inside the cupboard, while lighter items are stored in the door areas. The baskets are made of aluminium frames with melamine-coated wooden shelves. Melamine is hard-wearing, moisture-resistant and easy to clean. This is a clear advantage in the kitchen area in particular, as soiling can be removed quickly and the shelves retain their surface even with frequent use. All baskets are removable, which makes cleaning even easier. Kitchen larder pull-out for maximum organisation and clean movement The kitchen larder pull-out works with a swivelling mechanism that is designed for a door opening of up to 120°. When opening, the pull-out follows the door movement and removes the baskets completely from the cupboard. The movement is smooth and controlled so that there are no jerky movements, even with heavy loads. The mechanism is reversible and can be mounted on the left or right. The system can be combined with baskets from other compatible series, allowing for flexible planning. The clear division into inner and door baskets provides a good overview of the entire cabinet contents. Each area is visible and accessible without baskets overlapping or blocking each other. The kitchen larder pull-out is therefore suitable for larders as well as for household cupboards or appliance cupboards. Frequently asked questions: What cabinet width is the larder pull-out suitable for? The system is designed for a front width of 60 cm and fits into standard larder unit carcasses. How many baskets can be fitted? Depending on the cabinet height, several basket sets are possible. Two sets are recommended for a height of 1150 mm and three sets for a height of 1675 mm. What is the difference between inside and door baskets? Inner baskets are more resilient and designed for heavy items. Door baskets are designed to be lighter and are intended for smaller or lighter items. Why is melamine used for the shelves? Melamine is easy to clean, moisture-resistant and robust. It is particularly suitable for kitchens that are cleaned regularly. Can the kitchen cupboard pull-out be fitted on the left or right? Yes, the mechanism is reversible and can be fitted on the left or right depending on the installation situation. You can find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page

Modern pull-out larder unit with soft-close functionIn every kitchen, all food must be stored in such a way that it can be reached with one hand. This is easily possible with a pull-out for the larder unit. The pull-out ensures optimum utilisation of space and can be fitted in just a few simple steps. Details: Complete system comprising rail system and baskets Available in 15 cm, 30 cm and 45 cm installation widths Simultaneous full extension of all levels Integrated soft-close function High load capacity thanks to aluminium and wooden shelves Melamine shelves for easy-care use Simple and clean assembly Pull-out larder unit for narrow and medium cabinet widths The pull-out larder unit is available in three widths: 15 cm, 30 cm and 45 cm. The system therefore covers typical dimensions and can be flexibly integrated into different kitchen layouts. The synchronised pull-out of all baskets means that the entire storage space can be used without having to operate individual levels separately. This technology is particularly important for narrow cabinets, as access would otherwise be severely restricted. Pharmacy cabinet rail system with soft-close and durable runners The pharmacy cabinet rail system is the central functional element of the entire pull-out. It has been developed to operate smoothly while at the same time being able to take heavy loads. The mechanism has two independent movement levels, which stabilises the runner and prevents it from tilting. The soft-close function is already integrated and brakes the pull-out in a controlled manner before it closes gently.The mechanism is reversible and can be used for different stop situations. This means that the runner remains clean even when the pull-out is fully loaded. The combination of precise guidance and cushioned closing behaviour contributes significantly to the durability of the system. Pharmacist pull-out fitting as a complete system with sophisticated basket solutions The larder pull-out fitting is supplied as a complete system and consists of the mechanism and the corresponding baskets. Different basket types are used depending on the version. The front baskets have an aluminium edge with a melamine base, while the inner baskets have a metal base and all-round edge. Melamine is particularly hard-wearing, moisture-resistant and easy to clean, making it ideal for the kitchen. The load capacity is clearly defined: The front baskets each carry up to 15 kg, the inner baskets up to 10 kg. Overall, the system enables an increase in volume of up to 29% compared to simpler solutions. Assembly is clearly structured, as the mechanism and baskets are precisely matched to each other. You get a solution that works perfectly from a technical point of view and can be installed without complex adjustments. FAQ about the pull-out larder unit In which widths is the pull-out larder unit available? The system is designed for 15 cm, 30 cm and 45 cm wide carcasses and is therefore suitable for narrow to medium-sized pharmacy cabinets. What are the technical features of the larder unit runner system? The rail system works with two independent movement levels, can bear loads of up to 50 kg and has integrated soft-close damping. What materials are used for the pharmacy pull-out fitting? Aluminium, metal and wooden shelves with a melamine coating are used. This combination of materials ensures stability and easy cleaning. Can all baskets be pulled out at the same time? Yes, all levels extend synchronously so that you have access to the entire contents of the cupboard at all times. Find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page

High-quality kitchen cabinet fittings from ViboThe VIBO base unit pull-out is perfect for the modern kitchen. It is characterised by aesthetics and functionality. It can be integrated into a wide variety of kitchen models and impresses with its versatility. It is the perfect solution for organising your kitchen. Add convenience and efficiency to your kitchen with this practical and stylish pull-out unit. Ideal for a modern and functional kitchen interior.The kitchen base unit pull-out is extremely durableManufactured from robust steel, the VIBO kitchen base unit pull-out impresses with its durability. The VIBO base unit pull-out has a soft-close system. The kitchen base unit pull-out can be opened and closed almost silently and effortlessly. This means you can access your kitchen utensils quietly and effortlessly. But the gentle soft-close system not only ensures greater convenience, it also increases the durability of the base unit. The pull-out and the cupboard are protected from wear and damage by the gentle opening and closing. Details:Choice of different installation sizesEasy to installEquipped with a soft close pull-in mechanismHigh load capacity thanks to high-quality materials Easy-to-install kitchen base unit pull-out with high load capacityThe kitchen cabinet fitting is extremely easy to install. The kitchen base unit pull-out is designed so that it can be easily installed in existing kitchen furniture. It is mounted on the cabinet side so that it fits easily into the existing kitchen. The VIBO base unit pull-out offers generous capacity, whether for food or kitchen utensils. There is also plenty of space for pots and pans. The VIBO base unit pull-out also has a high load capacity. This means that larger quantities of food or heavy crockery can be stored without any problems. The generous capacity of the VIBO base unit pull-out means that you always have quick access to food and utensils. Quick access makes cooking and preparing food much easier.Modern kitchen cabinet fittings with a clear designBut that's not all. The VIBO base unit pull-out not only impresses with its functionality, but also with its elegant design. The sleek lines and timeless, chrome-plated finish blend seamlessly into any kitchen aesthetic, from modern to classic. The smooth surface and understated look ensure a stylish and unobtrusive appearance. The minimalist design maximises storage space without disrupting the overall look of your kitchen. With its high-quality finish and sophisticated design, the VIBO base unit pull-out sets aesthetic accents and contributes to the harmonious and elegant look of your kitchen. Perfect for anyone who values style and tidiness. The precise workmanship of the kitchen base unit pull-out makes the practical base unit an aesthetically pleasing piece of kitchen furniture. The elegant and aesthetic look does not stop at the kitchen cabinet fittings. The rails and fixings are designed to blend seamlessly into the design of the VIBO base unit pull-out.Integrate the kitchen base unit pull-out into your kitchenThe VIBO base unit pull-out is the ideal choice for anyone who wants their kitchen to be both functional and stylish. Thanks to its slim, timeless design, it blends in perfectly with the style of the existing kitchen - be it modern, classic or rustic. The chrome-plated surface gives it a high-quality and elegant look that enhances the overall impression of your kitchen. The kitchen cabinet fitting is also easy to install and offers plenty of space for a wide variety of uses.With the VIBO base unit pull-out, you have a flexible solution that can be easily integrated into existing kitchens. Overall, the VIBO base unit pull-out combines functionality, design and user-friendliness at the highest level, making it a valuable addition to any kitchen. Give your kitchen not only more organisation, but also a touch of elegance and style with the VIBO base unit pull-out. Find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page

Pull-out for corner unit kitchen from ViboFor kitchens with a corner unit, this is the solution for integrating an organised system into the kitchen block. The pull-out for the corner unit in the kitchen allows you to place pots, pans, crockery or spices and sauces. In kitchens, the corner cupboard is attached with a fitting so that it can be opened and closed with one hand.Details:Mounting stop selectable: right or leftSimple and smooth handlingHigh load capacity thanks to high-quality materials such as aluminium and coated wooden shelvesSimple assemblyConvenient kitchen corner unit fittingCorner units offer the opportunity to make the best possible use of the available space in the kitchen and extend the kitchen block across the corners. The challenge lies in the design of the surface. The shelves extend across the corner and make handling more difficult. Everything in the corner cupboard of the kitchen is difficult to reach. It seems almost impossible for people with limited mobility to get the stored items out of the cupboard without a pull-out.Advise your customers and offer them the practical solution of a pull-out for corner units to make their everyday life in the kitchen easier. The modules are used as accessories for new kitchens and for retrofitting existing kitchen units with corner units. The scope of delivery includes everything you need to install the pull-out. The pull-out for the corner unit in the kitchen is designed for one-sided installation and has a 90-degree radius for convenient handling of the system. The cupboard pull-out consists of two levels to utilise more of the available space for storing kitchen utensils.Ask your customers which side they need the pull-out for before the corner cupboard pull-out is delivered. It is available for the left and right-hand side. The Fly Moon stop is suitable for a 45 mm door front. In addition to the stop, the set includes a self-closing mechanism and a fixing rod, which is designed for both left and right. The product impresses with its shelves. They can be pulled out independently of each other so that people who need something from the top or bottom can access it easily.Kitchen corner unit solution with an overviewAs a B2C retailer, you can expand your range with the solution for corner cabinets in kitchens and offer your customers a useful product that simplifies the storage of kitchen items. The pull-out for kitchens with corner units is supplied with a fitting that is suitable for self-assembly. The scope of delivery includes an instruction manual to make assembly visual and self-explanatory.Perfect for modern kitchens - pull-out corner unitKitchen Your company manufactures kitchens and you need a pull-out unit to produce a kitchen block to offer on the market? Or do you manufacture customised kitchens and are looking for a solution for easy use of storage space for kitchens with a corner unit? You will find the right products for manufacturing kitchen cabinets in our online shop. You will also find fittings and carpentry supplies for tables and furniture of all kinds.we can help you with any questions you may have about pull-outs for corner cabinets in the kitchen. You can find out all about our pull-outs for the kitchen here: Kitchen fittings & pull-outs info page